Sonnenschein 12V 200ah Gel Battery A412/200A

• Customization: Available
• Type: Lead-Acid Batteries
• Usage: Car, UPS, Electric Power, Electric Bicycle
• Model NO.: A412/200A
• Nominal Voltage: 12V
• Discharge Rate: High Discharge Rate
• Shape: Cylindrical Battery
• Electrolyte: Acid
• Installation: Fixed
• Rechargeable: Chargeable
• Voltage: 12V
• Capacity: 200ah
• Weight: 26kg
• Transport Package: Carton Packing
• Specification: 198*166*171 mm
• Origin: China
• Production Capacity: 5000000pices/Year

Product Description

Sonnenschein 12V 200Ah lead-acid battery A412/200A


 

Model

Voltage(V)

Rated capacity (AH)

L(mm)

W(mm)

H(mm)

TH(mm)

Weight (kg)

A412/200A

12

200

198

166

171

171

26

Tub Capacity as per Manufacturer Specifications (in cubic feet):

The manufacturers began using cubic feet capacity numbers only recently. Previously, they used relative terms such as "Large" or "Extra Capacity" or laundry weight (e.g. "16 lbs per load") which did not take into account different fabric weight and volume. Others referred to capacity in terms of water used. Even washers available today do not have capacity written in the manual because the same manual can be used across multiple models. Once the washer is no longer sold, the sales literature is discarded and capacity information often lost.

Analyzing washers and their components, searching through old technical information and sales literature, and determining their capacity is a labor intensive and time-consuming task and we are far from finished. A small charge will help us continue our research.

Consider this: if you were to spend more than few minutes looking for tub capacity on the internet, you would be earning LESS than minimum wage.

Get A412 Tub Capacity ($0.99)

Calculate Top Load Washer Tub capacity

This is a geometric method to calculate tub capacity based on the cylinder volume formula. Unfortunately, the value could be as much as 25% off from the manufacturer stated capacity.

Why? Because a tub is not exactly a cylinder. The edge where bottom connected to the wall is not at 90 degree angle but smooth and rounded. The water line is not clearly marked and the bottom is not always flat. Finally, an agitator also takes capacity away from the tub.

This method can be used as a crude estimate but we do not recommend using it for comparisson when shopping for a new washer.

Determine your top load washer tub capacity by taking two simple measurements:



1. Use the ruler to measure the depth of the tub (indicated by the red line on the diagram)

2. Now find the distance accross the tub, the diameter (the green line on the diagram). Note that some tubs are narrow at the opening. In this case make the measurements INSIDE the tub.